Free Wire Harness Design & Guide for CAN Bus
Free Wire Harness Design & Guide for CAN Bus Read More »
CAN/FD bus sniffing from a browser
The CANFDuino platform can be turned into a handy 2 port CAN/FD sniffing tool for basic monitoring bus traffic without any fancy PC side software. What’s interesting is that a very old school terminal protocol developed in the 1970’s for VT100 terminals plays a part. The ANSI X3.64 protocol provided a really simple method for
CAN/FD bus sniffing from a browser Read More »
Speed Test – CANFDuino vs SPI CAN Shields
Need for Speed Imagine you are planning your next EV conversion, OBDII CAN project, or working on a complex simulation or gateway project at work. Looking around, you find a wealth of information on Arduino UNO’s and associated SPI to CAN shields. This solution looks easy, lots of related example code, lots of vendors, and
Speed Test – CANFDuino vs SPI CAN Shields Read More »
How To Properly Wire A CAN Bus
It’s just two wires, what’s so hard about that? (Download our example drawing & guide here) While CAN and CAN FD networks only consist of a few wires, there are a few gotcha’s to consider when working on a harness design for a network that needs to be robust and reliable. Below are three “gotchas”
How To Properly Wire A CAN Bus Read More »
CAN & CAN FD Explained For Open Source
CAN & CAN FD CAN bus or Controller Area Network was developed as a robust means for embedded systems (microcontrollers) to talk to one another. CAN bus is largely synonymous with automotive systems as being one of the primary communication backbones used to broadcast information from electronic control units (ECU’s), sensors, and instrumentation systems in
CAN & CAN FD Explained For Open Source Read More »
The Arduino DUE CAN Kit & CAR Kit
By combining our DUE CAN shield, the Arduino DUE microcontroller, an OBDII cable, and open-source software libraries you are ready to go with powerful a turn-key Arduino based dual CAN bus solution. Leverage the 32-bit processing capability of the Arduino DUE and the 2x built-in CAN ports for your next prototype (vs the wimpy 8-bit UNO). Making a CAN gateway? a data logger? or a
The Arduino DUE CAN Kit & CAR Kit Read More »
Managing Electronics Department for Nissan LMP1
The Nissan LMP1 project will go down as one of the hardest things I have ever done in my life. 18 months later we brought one car to the finish at LeMans. Thank you to my teammates and my family. Glad to be home, on to the next chapter!
Managing Electronics Department for Nissan LMP1 Read More »
Arduino DUE Survey
Please take our Suvey Monkey and tell us how are you using the DUE?
Arduino DUE Survey Read More »
OBD2 and CAN Acquisition Software Libraries
We have written OBD2 and CAN Acquisition Libraries for the Arduino DUE. These can be downloaded from GitHub. You can read the step-by-step instructions here.. We hope this is helpful for getting going with the DUE CAN shield! UPDATE: OBDII for 11bit & 29bit ID examples and how-to is found here
OBD2 and CAN Acquisition Software Libraries Read More »
Need CAN bus support for the Arduino DUE?
Now available for order – dual transceivers for both CAN ports on the Arduino DUE and a large prototyping area for your next project! Thank you to all who provided feedback on protoshields and purchased prototype CAN boards. We are also looking forward to providing some software support and examples in the near future. Thanks
Need CAN bus support for the Arduino DUE? Read More »